Roman |
Subarmalis - Leather |
Lorica Hamata |
|
The Sublamaris we offer is
made from 2-3mm thick leather. It feature side lacings which
allow the wearer to adjust its size.
Details:
Weight - 2.2kg Colour: Redish Brown Chest: 96 - 106cm
Waist: 96 - 106cm Shoulder to waist: 53cm Overal
Length: 92cm |
|
The Lorica Hamata was the typical
chainmail armour of the Roman legionnaire.
The RM chain maille type
is composed of small rings with an inner diameter of 6 mm
only. As per original finds, it is woven with alternate rows
of rivetedround rings (domed rivet heads) and punched flat
rings.
Available in sizes M, L and XL.
All measurements are taken fully stretched.
Details:
- Inner ring diameter: approx. 6 mm
- Ring width: approx. 1 mm
- Finish: natural (slightly oiled)
M - 120cm Chest (7.5kg)
L 140cm Chest (8kg)
XL - 150cm Chest (8.9kg)
|
£250.00
|
Email Enquiry |
£550.00 |
Email Enquiry |
Lorica Segmentata -
Corbridge A |
Lorica Segmentata -
Newstead |
|
Authentic replica following original from approx. 30 A.D.
found in Corbridge, England
Details:
- Material: 1.2 mm mild steel, brass, leather
M - up
to Chest 40" (Weight Approx 11kg)
L - Up to Chest 48"
(Weight Approx 12kg) |
|
The type Newstead
is named after a village in Southern Scotland, where the
Roman castra Trimontium was located. The remains of this
camp gave the example for our reconstruction.
Unlike the earlier
versions from Corbridge or Kalkriese you can’t adjust the
Newstead-armor. The four sections of the armor are to be
fitted by hooks and connection assemblies. You can wear
this one with a chest girth up to 112 cm circumference. Of
course you should measure the circumference considering
all (padded) cloths.
Details:
Material: 1.3 mm steel, brass fittings Size: suitable for
chest girth up to 112 cm Weight: approx. 9.2 kg
|
£185.00 |
Email Enquiry |
£285.00 |
Email Enquiry |
Balteus Legionary Belt |
Cingulum Legionary Belt |
|
The belt is made from robust, light-brown leather with
narrow brass fittings.
Details:
- length of belt: approx. 120 cm
- length of apron straps: approx. 35 cm
- weight: approx. 700 gr |
|
Completely redesigned version of
the Roman legionary belt. All fittings, buckles and pugio
belt holders have been resigned for utmost authenticity.
Details:
- length of belt approx. 115cm
- weight: 0.85kg |
£180.00 |
Email
Enquiry |
£180.00 |
Email Enquiry |
Late Centurian
Belt |
1st Ct. Centurio Cingulum |
|
The belt
consists of approx. 3 mm thick, brown cow hide and is
equipped with ten spindle-shaped brass decorations and a
multi-part, massive belt buckle.Two brass rings are also
attached to the belt, on which a dagger (), a sword
( Gladius or Spatha ) or a belt pocket can be worn.
Details:
- Length: approx.. 130 cm
- Width: approx.. 9 cm
-
fits a hip circumference of approx. 101 to 121 cm
- Weight: approx.. 1.0 kg |
|
The belt is made from high quality light-brown leather with
narrow brass fittings.
Details:
Belt Length -
130cm
Weight - 0.5kg
|
£135.00 |
Email Enquiry |
£135.00 |
Email Enquiry |
|
|
|
|
Gladiator |
Gladiator
Manica - Brass |
Gladiator
Manica - Leather |
|
Details:
- Material: Brass, Leather
- Material Thickness: approx. 1 mm
- Length: approx. 48.5 cm
- Width: approx. 14 cm on the upper arm, approx. 13 cm at
the wrist
- Height: approx. 8 cm |
|
Measurements:
- arm length: approx. 87 cm
- width at shoulder: approx. 35 cm
- width at wrist: approx. 12 cm
- weight: approx. 750 grams
|
£219.00 |
Email Enquiry |
£105.00 |
Email Enquiry |
|
|
|
|
Thracian
Gladiator Helmet |
Pompeii
Gladiator Helmet |
|
Details:
- Material: approx. 1.2 mm steel (18 ga)
- Suitable for a head circumference up to 72 cm
- Long distance (back to front): approx. 24 cm
- Short distance (ear to ear): approx. 20.5 cm
- Weight: approx. 2.2 kg |
|
Details
- Material: brass
- Suitable for a head circumference up to 63 cm
- Long distance (back to front): approx. 23 cm
- Short distance (ear to ear): approx. 19.5 cm
- Includes a padded cap
- Weight: approx. 3.9 kg |
£195.00 |
Email Enquiry |
£280.00 |
Email Enquiry |
|
|
|
|
|
|
|
|
|
|
|
|